A Comprehensive Beginners Guide to Patching Up Drywalls
Water damages are very common nowadays. Often, it is the thawing ice, snow, rain or malfunctions in the installed HVAC systems which trigger the decay and rot in the inner walls. What can homeowners do to protect themselves against such costly misfortunes? One, they could go online and try linking up with a certified and a reliable plumber. Alternatively, the prudent homeowners can just take the time to undertake the necessary repairs themselves and save tons of money.
It’s quite easy for one to figure out they have water seepage: The walls become damp, and patches form on the interior walls. Patches are soon followed by the infestation of full-blown mold. The whole house starts emitting an unpleasant, foul odor. Another tell-tale sign that something must be amiss with your water connections is a larger than normal water bill.
After learning of the leakage, the next logical step is to try and hunt down the exact location where the water system is broken or faulty. According to the seasoned plumbers, the faulty areas are mostly located on the kitchen and bathroom sinks, on the dish and washing machines and the toilets.
By the time the mold becomes visible, the leak must have had persisted for quite a while. Ensure you completely eradicate all traces of mold on the inner walls before fitting in a new drywall. Here’s a fantastic idea to ensure there are no other leaks in the vicinity. Close all the taps and note the water meter readings. Come back after two hours and observe whether the meter gauge has moved. If it has, leakages are still present, and the vice versa also holds.
Mold ought to be handled with extreme care and precaution by the DIY enthusiasts, at all times. Make sure you put on the recommended safety gear like dusting masks, gloves and goggles. However, if the proliferation of the mold is at an advanced stage, it’s best to call up a certified mold removing agent immediately so as to avoid affecting one’s health and wellness.
It’s alright to use a keyhole saw to cut out the damp sections with high precision. The walls can also be cut using the sharp flat end of a claw-bar. Place a mat on the entire surface of the wall being torn down. All the debris and mold collects over the mat, and that makes it easier for the cleanup process eventually.
For the next part of the repair process, you require a strong adhesive substance, a rivet drill, and a little inspiration. Stack the patch side by side with the remaining drywall and use the glue to bring them into contact hence fixing a large patch.
Patching Small Holes
Squeeze the sticky fluid into the hole and then use a sharp object to stuff the piece of patch inside. Afterward, polish the edges of the hole using a coarse product like a sandpaper to remove any overflowing patch bits. Finally, apply a second, and a third, if you prefer, a layer of the adhesive compound to give the repaired surface a smooth continuous finish. Finally, paint with desired colors, and you are done.
Pick up the mat placed on the floor by its edges. Take all that trash to a composite or a garbage bag waiting to dispose of it safely. Clean all the tools you have been using and place them back into their storages. Dip the paintbrush in warm soapy water or turpentine to get the paint off.